Here are a few links from the forum. Search on here for van build, trailer build, etc. Nobody is going to be able to walk you through everything. Research on here all you can to learn the basics and ask questions when you can’t figure something out. You can find 99% of the information needed in previous threads. In the process of finding answers to your questions you’ll learn things you didn’t even know you needed to learn.
[image] First of all let me say thank you for everyone that posts on this form I really appreciate all the knowledge everyone shares it is truly a blessing thank you .
I purchased a potato chip truck with a diesel V8 automatic transmission runs like a top all aluminum 25 feet bumper-to-bumper as an 18 1/2 feet long by 7 1/2 feet wide interior space. I want to turn the vehicle into a hot cold wash soft wash commercial and residential pressure washing vehicle , I plan on adding a bathroom for …
Tyler @Trp5925 and I had a conversation about setting up his trailer for a big job NOT including a 12v pump. He won’t really need it the way he’s set up. He can run efficiently with X-jets.
This is a good place for reels and strange stuff like pulleys, belts, etc. They’re most helpful on the phone. The website is kinda clunky.
Here’s the x-jet: M5 X-Jet Nozzle
Make sure you pick the right gpm for your machines.
Tyler’s trying to get things ready to roll without much of the fluff of a fancy…
I am starting this thread on my trailer build I am slowly working on. Hoping to get your thoughts, critiques, and suggestions along the way.
I am starting with a brand new 7x16 Lark enclosed. Upgrades included 5200lb torsion axles, 36" side door, screwless exterior with thicker panels, LED lighting, and rear barn doors.
This photo is when I brought it home. It was dark so not the best photo.
[20190110_185901]
Hey y’all I’ve been doing a lot of reading and learning and finally am ready to post on here and introduce myself. I’ve spent the last couple months researching pressure washing and soft washing and have spent the last couple weeks gathering my equipment. I have purchased a used 4000 PSI 4 GPM unit with a Honda gx390 and a geardrive cat pump, a used general pump 18” surface cleaner and a brand new 12v system from pressure tek. I will be spending the rest of the year gaining experience by doing m…
3 Likes
