DS injector 12v

[CCS]

Anyone ever force fed a DS injector with a 12v pump to increase mix strength ?

Someone was explaining they had done it and gotten a much stronger mix. Thanks

[OhioFloMo]

Forced downstream injector with shurflo 5.3gpm pump

Hey all Sean here the new guy! I began soft washing in the spring and for the last nine months I have been heavily researching the best ways to do soft washing with a pressure washer. I have been told by many that I cannot have a strong enough mix downstreaming to do roofs or hard flat surfaces. I recently upgraded from a 5 to an 8 gallon per minute machine. When I started with the 5gpm machine I was using a super sud sucker from Envirospec with the 2 to 3 gallon per minute nozzle. When I hooked…

Why not a 3 to 1 downstream injector?

Laws of physics/fluid dynamics

Downstreaming Stronger Mixes

So is there anyway to downstream higher chemical ratios than 10:1? Say if I wanted to downstream 10.5% SH and I wanted my final result to be coming out higher than 1.05%, is there any way I can do that with an injector? I’m sure its been explained somewhere on this forum, and if it has please direct me to the specific forum, but I’ve searched for several hours and still haven’t found the answer I’m looking for.

Force feed DS

Not much about this on previous posts. Ive been putting together a list of items i need to get started and im already over $3200. I haven’t even added the chemicals to that estimate yet other than elemonator. Id like to have a 12volt pump setup to be able to pre/post treat and do roofs but thats another $800. I just had a customer return a delavan 2.2gpm pump and we discounted it to $30 never used was missing 2 pieces of barbed pipe. Anyways i bought it. I was reading some people force feed thi…