Blue trees

[Infinity]

Two-stepping windows

So all my soaps came in, along with my proportioning tips to go in the end of the draw tubes. Did some preliminary tests to figure out which tips to use. One note on the plastic proportioning tips I got from Hydro-chem: they are 3/16” OD, not 1/4”. So you need to step down the end of the draw tube. I just shoved a small bit of 3/16” tubing into the end of the 1/4” soap lines to make up the difference. I changed out the hose barb on my x-jet to 1/4”. Directly below that, is a 3-way poly valve f…