Ya I’m learning that I’m just better off spending a few hundred more and buying the good stuff from PT. I think my northern tool days are over lol. Btw, half the fun is putting it together anyway.
1 Like
By the way Squid… Always pull the hose by the hose not the poly gun… The 12 inch tube breaks easy. Same thing when,putting it down DONT DROP IT and don’t drag it on rhe ground And when you can by a spare gun and have it in the truck and an extra j rod so you don’t have to switch out between the poly gun and the PW. A lot of guys use a 6 inch nipple they tend to last a little longer than the 12 inch ones
1 Like
Sheesh, I told you you don’t need the stinking fan. Only reason he has to put a fan on it is because it’s in a tiny box. and no one that’s serious about this puts it in a box. Post pics of your setup.
1 Like
Any drawback in the box?
Yeah, it’s a pain in the ass to work on or get to. Plus you’ve got the funky wiring for the fan which you don’t need. Go to HD gat a plastic outdoor switch cover and a regular switch to put in it. That way, you splice one wire to tie into the switch, which doesn’t rust by the way. You need a couple of feet of 2 wire #12 wire. Usually hw store has.
3 Likes
I put it in the box. 
. I know you said I didn’t need the fan, but it’s set up to come off the trailer when I’m not using it for the time being.
When it’s permanently mounted I’ll ditch the fan.
I just order 250’ of flextec I will let u know what I think when I get it … hopefully next few days
You try to raise them right and teach them good values…
2 Likes
