Okay guys, my wife and I are pulling the trigger on a hot water washer in the next 30 days. I’m leaning towards one of tbe following models but wanted feedback from you guys. I want to spend our money wisely the FIRST time. All will be 120v design.
Pressure pro gas engine 8gpm @ 3000.
Do these get hot enough? I’ve read some issues.
Pressure Pro DIESEL Kholer engine. 8gpm @3500
Or liquiforce 7.7gpm @3500
Any feedback on these three?
Here is the question. What do you anticipate washing?
We’re gonna focus on gas station lots, fast food drives, store walkways/ entrances and dumpster pads. we’re kicking around the idea of restaurant vent hoods, too.
It will also double as a second house washing rig as well.
PM me before you order. I would go with Pressure Pro 8gpm 3500psi if planning on doing commercial.
I got a pressure pro 8gpm 3500 psi and it works very well. Plenty of heat
do you have the machine @Racer
I’ve read pressure pros struggle to reach temps above 90 due to an undersized coil? What’s your thougnts?
see comment above from Fathom. I know plenty of people that have them and they work fine. Think they had some problems in the past but they claim 118 deg temp rise now.
If you got any suggestions on how to test temp on pressure pro i will do it on my machine.
meat thermometer
I’ve got a Hydrotek 8gpm 3500 psi with a heater and it heats up to 200 degrees which is all you need.
You could always fill up a 5 gallon bucket with water and use one of those infrared thermostat guns.
