This guy has had these posted online for sometime in my area. Claims “both motors are locked up”. Does anyone have any insight as to what brand they may be so that I can see what it would cost to get them back up and running if I do decide to make the purchase?
Thanks everyone!
It looks like he’s already taken off a lot of the good stuff. Shouldn’t there be an arm coming out of each manifold so your hose lays flat? Those motors aren’t super cheap either, couple hundred bucks each I think.
On the plus side there might be some eggs in the bird nest
I’m with @Jake_Lambert, it looks like a good deal is missing. If you could make them manual for about 400-500 all in I would say that is a good deal as it looks like their stainless. It wouldn’t be too hard to fashion handles and drill/tap them to fit I would think, but I would ballpark about $100 for that process and the tools assuming you have most of the tools already. (Your welcome to borrow my drill press)
I would also make sure the connecting hardware is good quality and in good shape.
That is a nightmare. Don’t buy that
3 Likes
Anthony is right. don’t mess with that. You can go wash a house and buy a new reel in a lot less time, money and aggravation.
1 Like
Alright, thanks everyone for the valuable advice. I’m meeting with the guy tomorrow to buy them from him!
Just kidding. But, thank you everyone for the input. I’ll pass on this option. He was at $500 then dropped it down to $300 and really I know nothing about these so, once again, thanks y’all!
2 Likes
