# Proportioner options for 12v systems **URL:** \ **Category:** Uncategorized\ **Created:** [April 8, 2025, 1:36am UTC](https://pressurewashingresource.com/community/t/proportioner-options-for-12v-systems/39808 "2025-04-08T01:36:15Z")\ **Posts on this page:** 3\ **Page:** 2
**Author:** ![dperez](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/dperez/32/21232_2.png) [@dperez](https://pressurewashingresource.com/community/u/dperez)\ **Post date:** [April 27, 2025, 6:25pm UTC](https://pressurewashingresource.com/community/t/proportioner-options-for-12v-systems/39808/21 "2025-04-27T18:25:38Z")
The manifold can be setup for Left or Right hand outlet. A stainless internal hex head pipe plug is installed on the side you want blocked off. ---
**Author:** ![bleachblaster](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/b/a9a28c/32.png) [@bleachblaster](https://pressurewashingresource.com/community/u/bleachblaster)\ **Post date:** [April 28, 2025, 3:40pm UTC](https://pressurewashingresource.com/community/t/proportioner-options-for-12v-systems/39808/22 "2025-04-28T15:40:36Z")
how about 5.5gpm vs 7 gpm 12 volt and 1/2" and 3/4" proportioners with 200 ft of discharge hose .does it matter what combo you mix and match or what? ---
**Author:** ![bleachblaster](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/b/a9a28c/32.png) [@bleachblaster](https://pressurewashingresource.com/community/u/bleachblaster)\ **Post date:** [May 5, 2025, 2:02pm UTC](https://pressurewashingresource.com/community/t/proportioner-options-for-12v-systems/39808/23 "2025-05-05T14:02:05Z")
can you mount the proportioners sideways or only only one specific way sideways or does it mess something up and should be straight up and down? [Previous page](https://pressurewashingresource.com/community/t/proportioner-options-for-12v-systems/39808.md?page=1)