Fallout thread and lots of help thanks guys

Going to buy it right now and try it… Buddy… I never saw that I don’t think or don’t remember

1 Like

So for this acid wash with this stuff… Do I put surfactant in it to Dan? Please I’m going to buy it right now… If this works I have hit a gold mine because everywhere in Ottawa is like this

No worries. I ran into the same situation as you. Used an acid wash and the fallout dissappeared. Here is my blog about it. Pressure Washing in Whitby: White Vinyl Siding Cleaning – Durham Window Cleaning and Pressure Washing

6 Likes

Depends on the chemical, some already have a surfactant. I might have a link on this site…

Just an observation, if anyone wants to spend money on the Rucker washing school, send me your money. I’ll burn it in the wood stove. You will end up with the same amount oid money spent, same knowledge earned, and I’ll warm the cabin some

8 Likes

here

3 Likes

On my way to home depot now to buy Thi stuff so any off the top info you have right now would be great… If this works…

Just by degreaser. I promise you it works better than anything else your body. Especially an acid.

3 Likes

I sprayed it on straight, with a pumpsprayer. Not sure about DSing this stuff. Let it dwell for 5-10 minutes, do not let it dry!!!

Try to pressure wash it off, if it still remains, give it a light scrubb and you should be golden.

1 Like

Just buy a degreaser. It works better than anything else you will buy. Especially an acid. Talk to text loves making me look like an idiot.

4 Likes

I know squid but I have to scrub with that stuff like you said right? If this acid wash can do it without scrubbing… I would be happy as hell

Damn so it does have to be applied and brushed… I’ll give it a try here


Going to try both… Also going to try down streaming for the purpose of science… Should I try mixing it with surfactant?

2 Likes

I don’t think you need a surfactant for either.

Okay I’ll let you know how it goes stand by

Please do!

Hopefully this with a foamer gun will let it stick on long enough

1 Like

So this is what happened with ten minutes of down streaming calcium lime and rust…

1 Like

Very educational for me. I missed the prior thread. I hadn’t heard of fallout. Thanks very much everyone.

4 Likes

Let me know how it goes. I’d absolutely try the degreaser and a brush before I escalate though.

What foamer are you using?

I’d honestly just apply it with the brush or small pump up.

1 Like