# Hose Upgrade

**URL:** <https://pressurewashingresource.com/community/t/hose-upgrade/35953>\
**Category:** Supplies & Equipment\
**Created:** [March 12, 2023, 2:15pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953 "2023-03-12T14:15:16Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![An0nymousGh0st](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/an0nymousgh0st/32/39185_2.png) [@An0nymousGh0st](https://pressurewashingresource.com/community/u/An0nymousGh0st)\
**Post date:** [March 12, 2023, 2:15pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/1 "2023-03-12T14:15:16Z")

</div>

I’m looking to upgrade the quality of hose. Hose from Northern Tool is breaking every other job. The local shop is not much better. Sometimes I think keeping it on a reel is the problem as there’s bends in the hose. I may be looking to do 6000 psi and maybe a 50 piece of 1/2" on the reel to reduce spike. Any suggestions?

---

<div class="post-metadata">

**Author:** ![DJPWS](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/djpws/32/36461_2.png) [@DJPWS](https://pressurewashingresource.com/community/u/DJPWS)\
**Post date:** [March 12, 2023, 2:26pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/2 "2023-03-12T14:26:11Z")

</div>

Fierce jet hose

---

<div class="post-metadata">

**Author:** ![Redjess](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/redjess/32/34375_2.png) [@Redjess](https://pressurewashingresource.com/community/u/Redjess)\
**Post date:** [March 12, 2023, 2:34pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/3 "2023-03-12T14:34:10Z")

</div>

I wanted raptor hose, not sure if they around anymore. I habe sutner, I like it alot. I just scored 300ft plus of gates powerclean 3000. Its ready once my sutner dies. The sutner took a beating recently, but its still leakfree.

---

<div class="post-metadata">

**Author:** ![Dirtyboy](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/d/919ad9/32.png) [@Dirtyboy](https://pressurewashingresource.com/community/u/Dirtyboy)\
**Post date:** [March 12, 2023, 2:53pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/4 "2023-03-12T14:53:12Z")

</div>

@racer swears by his BCE hoses. I own them too, came with rig and I bought extra when I bought it (shipping was free). I can’t say anything bad about it, but I don’t do nearly as much PW as you guys do. I also don’t work about 4.5 months out of the year due to winter, and then I do decks and paint so they get even less use.

---

<div class="post-metadata">

**Author:** ![DisplacedTexan](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/displacedtexan/32/29182_2.png) [@DisplacedTexan](https://pressurewashingresource.com/community/u/DisplacedTexan)\
**Post date:** [March 12, 2023, 4:17pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/5 "2023-03-12T16:17:47Z")

</div>

Suttner hose has done well for me. It’s readily available, good price, and I like the jacketing on it better than others. Doesn’t leave any marks behind whatsoever.

---

<div class="post-metadata">

**Author:** ![dperez](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/dperez/32/21232_2.png) [@dperez](https://pressurewashingresource.com/community/u/dperez)\
**Post date:** [March 12, 2023, 10:12pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/6 "2023-03-12T22:12:53Z")

</div>

Don’t attempt to ever use reusable field fittings on it as that hose is Metric

---

<div class="post-metadata">

**Author:** ![DisplacedTexan](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/displacedtexan/32/29182_2.png) [@DisplacedTexan](https://pressurewashingresource.com/community/u/DisplacedTexan)\
**Post date:** [March 12, 2023, 11:33pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/7 "2023-03-12T23:33:49Z")

</div>

Personally, I’ve never even considered trying to patch one together. Just never seemed worth the time or the, albeit slight, risk. Just keep spares on hand.

---

<div class="post-metadata">

**Author:** ![An0nymousGh0st](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/an0nymousgh0st/32/39185_2.png) [@An0nymousGh0st](https://pressurewashingresource.com/community/u/An0nymousGh0st)\
**Post date:** [March 12, 2023, 11:37pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/8 "2023-03-12T23:37:39Z")

</div>

I’m looking into some of that brand.  
Maybe will put some 1/2" or 2 wire on the first 50-100’.  
Looks like Manatee or Panhandle Supply has it.

---

<div class="post-metadata">

**Author:** ![Chesebro](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/chesebro/32/32011_2.png) [@Chesebro](https://pressurewashingresource.com/community/u/Chesebro)\
**Post date:** [March 13, 2023, 2:52am UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/9 "2023-03-13T02:52:38Z")

</div>

My all time favorite hose is the Goodyear hose grey. But its not easy to get and also very expensive, Im giving suttner a try, too early to tell

---

<div class="post-metadata">

**Author:** ![An0nymousGh0st](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/an0nymousgh0st/32/39185_2.png) [@An0nymousGh0st](https://pressurewashingresource.com/community/u/An0nymousGh0st)\
**Post date:** [March 25, 2023, 12:38am UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/10 "2023-03-25T00:38:21Z")

</div>

As an update I put the 50’ piece on the reel and did a bucket test. Couldn’t believe that I filled 2 5 gallon buckets in exactly one minute. I did another 30 second test and filled a third bucket to the top. For the test I had the 50’ 1/2" and then about 130’ of 3/8" added in sections. Before I was getting about 8 1/2 GPM so I am surprised that it made that much difference. EDIT: This is the Fierce Jet 50’ 2 wire I’m getting about 10 GPM now w/the hose upgrade.

---

<div class="post-metadata">

**Author:** ![Innocentbystander](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/innocentbystander/32/36516_2.png) [@Innocentbystander](https://pressurewashingresource.com/community/u/Innocentbystander)\
**Post date:** [March 25, 2023, 1:21am UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/11 "2023-03-25T01:21:53Z")

</div>

What tip were you using?

---

<div class="post-metadata">

**Author:** ![DJPWS](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/djpws/32/36461_2.png) [@DJPWS](https://pressurewashingresource.com/community/u/DJPWS)\
**Post date:** [March 25, 2023, 12:47pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/12 "2023-03-25T12:47:37Z")

</div>

I’m telling you guys… give fierce jet hose a try. You won’t buy another

---

<div class="post-metadata">

**Author:** ![Innocentbystander](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/innocentbystander/32/36516_2.png) [@Innocentbystander](https://pressurewashingresource.com/community/u/Innocentbystander)\
**Post date:** [March 25, 2023, 2:34pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/13 "2023-03-25T14:34:46Z")

</div>

They don’t have 200ft sections. They have fixed ends, not swivels, they support CETA. Can’t give them my money.

---

<div class="post-metadata">

**Author:** ![An0nymousGh0st](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/an0nymousgh0st/32/39185_2.png) [@An0nymousGh0st](https://pressurewashingresource.com/community/u/An0nymousGh0st)\
**Post date:** [March 25, 2023, 2:41pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/14 "2023-03-25T14:41:19Z")

</div>

This is just the ball valve (bucket test)

---

<div class="post-metadata">

**Author:** ![Robnoxous](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/r/d9b06d/32.png) [@Robnoxous](https://pressurewashingresource.com/community/u/Robnoxous)\
**Post date:** [April 6, 2023, 2:37pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/15 "2023-04-06T14:37:16Z")

</div>

Heath at Texas Pressure Wash Store, Manatee, and Panhandle all have 200ft sections of Fierce Jet.

---

<div class="post-metadata">

**Author:** ![Robnoxous](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/r/d9b06d/32.png) [@Robnoxous](https://pressurewashingresource.com/community/u/Robnoxous)\
**Post date:** [April 6, 2023, 2:38pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/16 "2023-04-06T14:38:25Z")

</div>

Also only 1 fixed end on the Fierce Jet Assemblies, other end Male Pipe Swivel.

---

<div class="post-metadata">

**Author:** ![Innocentbystander](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/innocentbystander/32/36516_2.png) [@Innocentbystander](https://pressurewashingresource.com/community/u/Innocentbystander)\
**Post date:** [April 6, 2023, 5:26pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/17 "2023-04-06T17:26:40Z")

</div>

I’d sell my business for a box of Krispy Kreme before I bought from them

---

<div class="post-metadata">

**Author:** ![dperez](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/dperez/32/21232_2.png) [@dperez](https://pressurewashingresource.com/community/u/dperez)\
**Post date:** [April 8, 2023, 6:43am UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/18 "2023-04-08T06:43:19Z")

</div>

I haven’t had Krispy Kreme since 02’. At an old job with hundreds of employees they were doing employee appreciation with four humongous flatbed carts of glazed donuts one morning and I just kept getting two, stuffing my mouth and getting back in line. I was lost in the crowd making multiple trips. I ate about 16 then I got really sick. Those were my last donuts!

---

<div class="post-metadata">

**Author:** ![Innocentbystander](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/innocentbystander/32/36516_2.png) [@Innocentbystander](https://pressurewashingresource.com/community/u/Innocentbystander)\
**Post date:** [April 8, 2023, 3:35pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/19 "2023-04-08T15:35:20Z")

</div>

Cheerwine and Krispy Kreme are both from NC. I live in the best state ever lol

---

<div class="post-metadata">

**Author:** ![DisplacedTexan](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/displacedtexan/32/29182_2.png) [@DisplacedTexan](https://pressurewashingresource.com/community/u/DisplacedTexan)\
**Post date:** [April 8, 2023, 5:04pm UTC](https://pressurewashingresource.com/community/t/hose-upgrade/35953/20 "2023-04-08T17:04:30Z")

</div>

Shipley’s is good donuts but I think my favorite donut is Hurts. They’re sooooo good.

The absolute best fried sausage rolls are from Daylight Donuts. It’s not a kolache but it’s really good.

[Next page](https://pressurewashingresource.com/community/t/hose-upgrade/35953.md?page=2)
