# Heavy Organic Growth - Need Help!

**URL:** <https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144>\
**Category:** Roof Cleaning\
**Created:** [February 24, 2020, 10:52pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144 "2020-02-24T22:52:47Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 24, 2020, 10:52pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/1 "2020-02-24T22:52:47Z")

</div>

I am currently in the process of building a 12v portable softwash system on a cart. It will be using a 5gpm pump at 70 psi. I plan on using Apple Wash as the surfactant, I also have EBC (unsure if anyone uses that in a roof mix).

I have been approached to clean a concrete tiled roof as he wants it clean for painting. From my research on here and on YT, the consensus is that if there is heavy organic growth present on the roof, you simply leave it to fall off with the wind and the rain after treating it with your roof mix.

My question is that if there is heavy organic growth (picture below is from the rental I currently live in, lots of lichen present) on this concrete tiled job, he will expect it all gone once I have left as presumably he won’t want to wait 6-12 months for the lichen to fall off in its own time before painting it. What suggestions do you have to turn a roof like the one pictured into one that is clean and free of heavy lichen?

Personally I think its unrealistic given the type of growth present and the amount to expect all traces of it to be gone from the roof once I’m finished.

I think the only way is to either 1) use low pressure to try and rinse it off or 2) use a broom to brush it off. As its a concrete tiled roof, I don’t think it would be a great idea to be walking on it as tiles could be damaged.

I would love to hear any suggestions or tips on removing heavy lichen growth.

 ![lichen on roof](https://pressurewashingresource.com/community/uploads/default/original/3X/1/b/1b7efa478a1159bce23347aa94ba698879be36c4.jpeg)

---

<div class="post-metadata">

**Author:** ![dcbrock](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/dcbrock/32/38857_2.png) [@dcbrock](https://pressurewashingresource.com/community/u/dcbrock)\
**Post date:** [February 24, 2020, 10:59pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/2 "2020-02-24T22:59:28Z")

</div>

I can’t answer the main question, but I did find this if it helps any. That pitch may be problematic however.

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 24, 2020, 11:06pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/3 "2020-02-24T23:06:51Z")

</div>

Thanks for that mate, I haven’t seen the job yet so don’t know the pitch. He will be sending me pics later on today.

---

<div class="post-metadata">

**Author:** ![MuscleMyHustle](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/musclemyhustle/32/25298_2.png) [@MuscleMyHustle](https://pressurewashingresource.com/community/u/MuscleMyHustle)\
**Post date:** [February 25, 2020, 3:51am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/4 "2020-02-25T03:51:40Z")

</div>

Need some photos bud, it’s like describing a haircut to a barber over the phone.

---

<div class="post-metadata">

**Author:** ![Firefighter4hire](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/firefighter4hire/32/21981_2.png) [@Firefighter4hire](https://pressurewashingresource.com/community/u/Firefighter4hire)\
**Post date:** [February 25, 2020, 3:52am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/5 "2020-02-25T03:52:44Z")

</div>

@MuscleMyHustle That was well said  
I’m going to use that one

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 25, 2020, 4:10am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/6 "2020-02-25T04:10:59Z")

</div>

![roof](https://pressurewashingresource.com/community/uploads/default/original/3X/9/7/9737f7c22224c46ee7819aed877ba2be4f450836.jpeg)

---

<div class="post-metadata">

**Author:** ![MuscleMyHustle](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/musclemyhustle/32/25298_2.png) [@MuscleMyHustle](https://pressurewashingresource.com/community/u/MuscleMyHustle)\
**Post date:** [February 25, 2020, 4:24am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/7 "2020-02-25T04:24:47Z")

</div>

that’s nothing like the photo above, I was thinking corn growing on the roof. Mix up some 4-5% and go to town, with the heat you guys are getting over there at the moment it will start flaking in 10 minutes, let the sh bake on good and give it a nice rinse. Be sensible with pressure.

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 25, 2020, 4:30am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/8 "2020-02-25T04:30:31Z")

</div>

Yeah I know, I was using that as an example for my question of removing heavy lichen growth. Plus its always good to get advice on removing it from roofs that have heaps of it on them. I’ve seen a lot around my area that are like the one I live in.

Once I get all my bits, I’ll treat my one and see how well it goes.

---

<div class="post-metadata">

**Author:** ![Racer](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/racer/32/4931_2.png) [@Racer](https://pressurewashingresource.com/community/u/Racer)\
**Post date:** [February 25, 2020, 5:50am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/9 "2020-02-25T05:50:00Z")

</div>

If you’ve got big clumps of growth like on yours, you probably want to brush off the bigger clumps before you treat or I’ve been known to use my shooter tip to knock off clumps, just make sure to not shoot it under the tile. On one like yours, that’s bad, after you brush off bigger clumps, pre-wet, let sit for about 5 min before you apply solution. It softens it up and makes more absorbant before you apply solution.

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 25, 2020, 7:53am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/10 "2020-02-25T07:53:25Z")

</div>

Thanks for the information Racer!

---

<div class="post-metadata">

**Author:** ![bluewave18ft](https://pressurewashingresource.com/community/letter_avatar_proxy/v4/letter/b/8797f3/32.png) [@bluewave18ft](https://pressurewashingresource.com/community/u/bluewave18ft)\
**Post date:** [February 27, 2020, 12:26am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/11 "2020-02-27T00:26:23Z")

</div>

![image](https://pressurewashingresource.com/community/uploads/default/original/3X/2/9/29ff32113f21413780135f55cdd3c5a4b047a87c.jpeg)  
I hoped 4% would be enough. Maybe 2 applications. Nope. I had to walk the roof and rinse with jrod on a lance to get the roof clean.

---

<div class="post-metadata">

**Author:** ![Firefighter4hire](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/firefighter4hire/32/21981_2.png) [@Firefighter4hire](https://pressurewashingresource.com/community/u/Firefighter4hire)\
**Post date:** [February 27, 2020, 1:01am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/12 "2020-02-27T01:01:48Z")

</div>

I would have gone 50/50 and walked away

---

<div class="post-metadata">

**Author:** ![dcbrock](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/dcbrock/32/38857_2.png) [@dcbrock](https://pressurewashingresource.com/community/u/dcbrock)\
**Post date:** [February 27, 2020, 5:50am UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/13 "2020-02-27T05:50:52Z")

</div>

What happened to the concrete? Lots of stripes going on there.

---

<div class="post-metadata">

**Author:** ![Firefighter4hire](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/firefighter4hire/32/21981_2.png) [@Firefighter4hire](https://pressurewashingresource.com/community/u/Firefighter4hire)\
**Post date:** [February 27, 2020, 12:58pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/14 "2020-02-27T12:58:30Z")

</div>

We are talking about the roof. You already know what I would do to the driveway

---

<div class="post-metadata">

**Author:** ![jcfin](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/jcfin/32/21817_2.png) [@jcfin](https://pressurewashingresource.com/community/u/jcfin)\
**Post date:** [February 27, 2020, 1:18pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/15 "2020-02-27T13:18:00Z")

</div>

I haven’t done any roofs yet but I’m pretty sure if your customer wants a tile roof clean for painting, then it isn’t enough to soft wash it. You’ll need to pressure clean the whole thing. Take a surface cleaner up there or get one of the specifically made for roof cleaning accessories.

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 27, 2020, 7:57pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/16 "2020-02-27T19:57:40Z")

</div>

Yeah I was thinking that too tbh

---

<div class="post-metadata">

**Author:** ![AUSSIE](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/aussie/32/14864_2.png) [@AUSSIE](https://pressurewashingresource.com/community/u/AUSSIE)\
**Post date:** [February 27, 2020, 8:18pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/17 "2020-02-27T20:18:00Z")

</div>

I would treat with 4-6% then rinse with enough pressure as needed to remove remaining debris, youre going to have to walk it as are the painters just don’t stomp around like a drunk elephant.  
Take pictures of any broken tiles you notice prior to clean- usually will be a couple and if you break any yourself be honest about it and tell the client- some have spares in the shed or are ok with a sikaflex repair.

---

<div class="post-metadata">

**Author:** ![MuscleMyHustle](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/musclemyhustle/32/25298_2.png) [@MuscleMyHustle](https://pressurewashingresource.com/community/u/MuscleMyHustle)\
**Post date:** [February 27, 2020, 9:20pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/18 "2020-02-27T21:20:18Z")

</div>

> [@jcfin](#):
>
> Take a surface cleaner up there

Don’t take any surface cleaner up there.

---

<div class="post-metadata">

**Author:** ![jcfin](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/jcfin/32/21817_2.png) [@jcfin](https://pressurewashingresource.com/community/u/jcfin)\
**Post date:** [February 27, 2020, 9:22pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/19 "2020-02-27T21:22:32Z")

</div>

Why not? If you are tied off, I don’t see the problem. Many people do it.

---

<div class="post-metadata">

**Author:** ![wap2dem](https://pressurewashingresource.com/community/user_avatar/pressurewashingresource.com/wap2dem/32/25255_2.png) [@wap2dem](https://pressurewashingresource.com/community/u/wap2dem)\
**Post date:** [February 27, 2020, 9:25pm UTC](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144/20 "2020-02-27T21:25:43Z")

</div>

What is the deal with the specialized roof cleaning SC? wouldn’t that still risk forcing water under the tiles?

[Next page](https://pressurewashingresource.com/community/t/heavy-organic-growth-need-help/24144.md?page=2)
