Finally got to it

I was due for a new chemical injector, and I finally added an aluminum rod to keep the pick up filter at the bottom… Long over due, but this should keep me from going

back to the trailer to check that it’s still picking up chems.

1 Like

That is a good start.
But use a pvc pipe and run the hose through it.
And get a metal restrainer the one you have there has a thin film mesh, th at will disolve after a couple of uses and could affect your chem injector

1 Like

Ok!

Any pictures? To get a better idea

Look at this on eBay

I use these
https://www.zoro.com/fimco-suction-line-ball-strainer-38-in-5116346/i/G4120383/?gclid=Cj0KCQiAi7XQBRDnARIsANeLIesTWrL3tNjXU9ycNKqQXQmf3XS8-2YFsdSGNe2TlWT7S7UemNVsH4saAmNREALw_wcB

But wiith a 1/4 barb connector to the hose